Solo Impression Trays: Edentulous L/Deep - No.4

Blue disposable plastic impression trays for more accurate impressions.

Contents

• Box of 25

Solo Impression Trays: Edentulous U/Deep - No.3

Blue disposable plastic impression trays for more accurate impressions.

Contents

• Box of 25

Solo Impression Trays: L/L - No.12

Blue disposable plastic impression trays for more accurate impressions.

Contents

• Box of 25

MX-300 Automatic Mixer - Magnetic Basket

Magnetic Basket for use with the MX-300 automatic mixer for alginates from Zhermack.

Contents

• 1 x Magnetic Basket

ImpressPLUS Yellow Intra-Oral Tips (100)

ImpressPLUS Yellow Intra-Oral Tips from Perfection Plus fit 4.2mm mixing tips and are used to precisely dispense impression materials.

Contents

• Pack of 100 x ImpressPLUS Intra-Oral Tips

Impressiv - 1 Litre Trigger Spray

Universal Dental Impression Disinfectant - Rapid acting alcohol based spray for disinfecting of dental impression materials. 

Ready to use solution providing broad spectrum disinfection for dental impression materials. Impressiv is a ready to use high level disinfectant specially formulated for the rapid disinfection of all Dental impression materials to include Silicone, Alginate, Polyether and plaster.

Impressiv disinfects on contact and dries rapidly ensuring no distortion or diversion to detail of dental impressions.

Contents

• 1 litre spray bottle

Medibase Intra-Oral Tips (100)

Yellow intra-oral tips to fit mixing tips for addition silicone cartridge materials

Contents

• Pack of 100

MX-300 Automatic Mixer - Water Dosing Bottle

Water Dosing Bottle for use with the MX-300 automatic mixer for alginates from Zhermack.

Contents

• 1 x Water Dosing Bottle

Kulzer Universal Adhesive

Adhesive for silicone impression material. For all Kulzer silicone impression materials.

Contents

• 1 x 10ml bottle

SS White Impression Paste

Zinc oxide impression paste.

• Controlled working time.
• Oral setting time 2-2.5 mins.
• Mixes in 30 secs.
• Snap set for edentulous impressions and denture plate adjustment.

Contents

• 150g tube of white zinc oxide paste.
• 60g tube red eugenol paste.

ImpressPLUS Wash - Light Body Fast Set 2 x 50ml

ImpressPLUS Light Body Wash from Perfection Plus is a vinyl polysiloxane impression material with excellent tear strength to maintain integrity on removal.

ImpressPLUS Light Body is recommended as a wash (correction) material in either single step (sandwich) or double step techniques.

• Working time: 1 minute
• Setting time: 1 minutes

Contents

• 2 x 50ml cartridges of ImpressPLUS Light Body Fast Set
• 6 x yellow mixing tips
• 6 x yellow intra-oral tips

PolyTrays: Yellow - Upper Large (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Yellow - Upper Large Polytrays

PolyTrays: Blue - Lower Medium (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Blue - Lower Medium Polytrays

PolyTrays: Green - Lower Small (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Green - Lower Small Polytrays

PolyTrays: Assorted Kit (24)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 24 x assorted Polytrays

PolyTrays: Blue - Upper Medium (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Blue - Upper Medium Polytrays

PolyTrays: Green - Upper Small (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Green - Upper Small Polytrays

PolyTrays: Yellow - Lower Large (25)

Ash Polytrays from Dentsply Sirona are unique colour coded perforated impression tray which allow sectioning for taking localised crown and bridge impressions.

• Designed for single-use only
• Compatible with all alginate and elastomeric impression material
• 3 colour-coded sizes for accurate fit

Contents

• 25 x Yellow - Lower Large Polytrays

Xantalgin Crono

4 colour chromatic alginate. Colour continuously changes throughout setting time. Dimensional stability guaranteed for 5 days.

Properties

• Quick-setting.
• Dust-free.
• Flavour: mint.
• Creamy consistency.
• Working time: 1min. 15sec.
• Time in mouth: 1min.
• Total setting time: 2min. 15sec.
• Mix ratio: 22.5g powder, 50ml water.

Contents

• 1 x 500g bag

ImpressPLUS Bite Registration: Fast Set 2 x 50ml

ImpressPLUS Bite Registration from Perfection Plus is a thixotropic vinyl polysiloxane material used for bite registration, a quick die for temporary inlays and onlays, copying transfers and primary impression with bite trays.

ImpressPLUS Bite Registration offers outstanding handling for occlusal registration every time with a light blue mousse like material that does not compress or flex.

• Working time: 30 seconds
• Setting time: 1 minute

Contents

• 2 x 50ml cartridges of ImpressPLUS Bite Registration in Fast Set
• 6 x green mixing tips

ImpressPLUS Bite Registration: Super Fast Set 2 x 50ml

ImpressPLUS Bite Registration from Perfection Plus is a thixotropic vinyl polysiloxane material used for bite registration, a quick die for temporary inlays and onlays, copying transfers and primary impression with bite trays.

ImpressPLUS Bite Registration offers outstanding handling for occlusal registration every time with a light blue mousse like material that does not compress or flex.

• Working time: 30 seconds
• Setting time: 30 seconds

Contents

• 2 x 50ml cartridges of ImpressPLUS Bite Registration in Super Fast Set
• 6 x green mixing tips

Impregum Spatula

Flexible metal spatula for elastomers

Contents

• 1 x spatula

Kerr Impression Compound: Green - 15 Sticks

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

Indications

• Red: for copper rings and bite registration. Fusion temperature: 55-56°C.
• Green: for copper rings and peripheral joints. Fusion temperature: 50-51°C.

Contents

• 15 sticks of Kerr Green Impression Compound

Kerr Impression Compound: Red - 8 Cakes

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

• Fusion temperature: 55-56°C.
• Fusion temperature: 50-51°C.

CONTENTS

• 8 cakes of Kerr Red Impression Compound

Kerr Impression Compound: Red - 15 Sticks

Kerr Impression Compound for full or partial impressions or copper bands/tracing.

Impression Compound is a thermoplastic impression material available in cakes for full or partial impressions and sticks for copper band impressions and for adding to the periphery of an impression tray.

Each coloured variant has a controlled working temperature.

INDICATIONS

• Red: for copper rings and bite registration. Fusion temperature: 55-56°C.
• Green: for copper rings and peripheral joints. Fusion temperature: 50-51°C.

CONTENTS

• 15 sticks of Kerr Red Impression Compound